Language Selector
| Español |
| Deutsch |
| 中文 (Greater China) |
| 日本語 (Japan) |
| 한국어 (Korea) |
Products
4-port OC-48c/OC-12c/OC-3c Packet over SONET/SDH Line Card With Pluggable SFP Modules
(E-Series Line Card)
- CLI Selectable
OC-3c/OC-12c/OC-48c Multi-rate Ports - Line-rate IPv4 Routing with up to 512K IPv4 Addresses
4-port OC-3c/OC-12c/OC-48c Packet over SONET/SDH Line Card With Pluggable SFP Modules Overview
The 4-port OC-3c/OC-12c/OC-48c Packet over SONET/SDH (POS) line card for the Force10 E-Series E600 and E1200 is based on the innovative Force10 TeraScale™ ASICs and provides pluggable SFP optics supporting distances up to 80 km.
This line card provides industry leading density of up to 56 OC-3c/OC-12c/OC-48c multi-rate SONET/SDH ports in a single chassis. Additionally, the TeraScale ASICs and E-Series architecture deliver line-rate performance with QoS and Access Control Lists (ACLs) enabled and jumbo frame support with full IPv4 routing.
These cards present a truly flexible solution that can be used in applications spanning the MAN and WAN.
Key Features
- Full line-rate throughput for 40 to 9,252 byte SONET/SDH frames on all ports with all features enabled
- Pluggable SFP optics providing support for IR-1 and LR-2 optical interfaces
- Ports are CLI selectable options on an individual basis to be either OC-3c,
OC-12c or OC-48c with either SONET or SDH framing and PPP encapsulation - Guaranteed packet delivery through virtual output queues that minimize latency and eliminate head-of-line blocking
- Standards-compliant Packet over SONET/SDH support
- Wire-speed security features including up to 26K IPv4 Access Control Lists (ACLs) per line card (using default CAM profiles)
- Fully functional routing with up to 512K IPv4 addresses per line card (using default CAM profiles)
4-port OC-3c/OC-12c/OC-48c Packet over SONET/SDH Line Card With Pluggable SFP Modules Specifications
Physical
- Four full-duplex OC-3c/OC-12c/OC-48c ports with pluggable SFP modules
- Occupies a single slot in the Force10 E600/E1200 chassis
- Dimensions:
- 1.07 h x 18.75 w x 16.06" d
(2.7 h x 47.6 w x 40.79 cm d)
- 1.07 h x 18.75 w x 16.06" d
- Weight:
- 10 lbs (4.5 kg)
- Maximum insertion force:
- 32.5 lbs (14.7 kg)
- Maximum power consumption and thermal output:
- 175 W (597 BTU/h)
- Operating temp:
- 32° F to 131° F (0° C to 55° C)
- Relative humidity:
- 5 to 90% non-condensing
- Maximum altitude:
- 10,000 ft (3,048 m)
Management
- Link status and link activity LEDs per port
- Line card status LED
- Onboard diagnostic capability
SONET/SDH Compliance
- Telcordia GR-253-CORE
(Bellcore) - ANSI T1.105
- ITU-T G.707, G.957
RFC Compliance
- 1661 PPP
- 1989 PPP Link Quality Monitoring
- 1990 PPP Multilink Protocol
- 1994 PPP CHAP
- 2615 PPP over SONET/SDH
- 3592 SONET/SDH MIB
Regulatory Compliance
Safety
- UL/CSA 60950-1, 1st Edition
- EN 60950-1, 1st Edition
- IEC 60950-1, 1st Edition Including all National Deviations and Group Differences
- EN 60825-1 Safety of Laser Products Part 1:
- Equipment Classification Requirements and User's Guide
- EN 60825-2 Safety of Laser Products Part 2:
- Safety of Optical Fibre Communication Systems
- FDA Regulation 21 CFR 1040.10 and 1040.11
Emissions
- Australia/New Zealand: AS/NZS CISPR 22: 2006, Class A
- Canada: ICES-003, Issue-4, Class A
- Europe: EN 55022: 2006
(CISPR 22: 2006), Class A - Japan: VCCI V3/2007.04 Class A
- USA: FCC CFR 47 Part 15, Subpart B, Class A
Immunity
- EN 300 386 V1.3.3: 2005 EMC for Network Equipment
- EN 55024: 1998 + A1: 2001 + A2: 2003
- EN 61000-3-2: Harmonic Current Emissions
- EN 61000-3-3: Voltage Fluctuations and Flicker
- EN 61000-4-2: ESD
- EN 61000-4-3: Radiated Immunity
- EN 61000-4-4: EFT
- EN 61000-4-5: Surge
- EN 61000-4-6: Low Frequency Conducted Immunity
RoHS
All E-Series components are EU RoHS compliant
SFP Support
Any combination of Force10 LR-1 or LR-2 SFPs may be populated. SFP modules are sold separately.
See Media Specifications for more details.
Ordering Information
- Order Number
- Description
- LC-EG-OC-48c-4P
- 4-port OC-3c/
OC-12c/OC-48c
POS line card – SFP
modules required (series EG)
- GP-SFP-OC-12/3-1IR1
- Qualified IR-1 OC-3c/OC-12c SONET/SDH SFP optics module, LC connector
- GP-SFP-OC-48-1IR1
- Qualified IR-1
OC-48c SONET/SDH
SFP optics module,
LC connector
- GP-SFP-OC-48-1LR2
- Qualified LR-2
OC-48c SONET/SDH
SFP optics module,
LC connector
- Media Modules
- See Media Specifications for more details.
Force10 Networks’ line cards meet the requirements of demanding Layer 3 applications. They support Layer 3 applications that require line-rate performance, high port densities and demand robustness at low per-port prices.
Downloads
Datasheet
Last updated: 7/9/2008 12:14:24 PM