Products

Products Home
FTOS
E-Series
E-Series Line Cards
C-Series
C-Series Line Cards
S-Series
P-Series
FTMS
Media Specifications
Testing Reports
Customer Profiles
Testimonials
White Papers
Force10 Images/Photos
Force10 EULA

 

Contact Our Sales Team
    +1 866 600 5100
    +1 408 965 5100

4-port 10 Gigabit Ethernet LAN/WAN PHY Line Card With Pluggable XFP Modules
(E-Series Line Card)

4-port 10 Gigabit Ethernet LAN/WAN PHY Line Card E-Series Line Card
  • Non-Blocking Scalability
  • Up to 56 10 GbE Ports in a Single Chassis
  • Full L2 Switching and IPv4/IPv6 Routing
Overview
Specifications
Line Cards
f10
 

4-port 10 Gigabit Ethernet LAN/WAN PHY Line Card With Pluggable XFP Modules Overview

 

The 4-port 10 Gigabit Ethernet line card for the Force10 E-Series E600 and E1200 is based on the innovative Force10 TeraScale™ ASICs and provides pluggable XFP modules supporting distances up to 80 km.

This line card provides industry-leading density of up to 56 line rate, non-blocking 10 Gigabit Ethernet ports in a single chassis. Additionally, the TeraScale ASICs and E-Series architecture enable line-rate performance with QoS and Access Control Lists (ACLs) enabled, jumbo frame support, with simultaneous L2 switching, IPv4 and IPv6 routing.

These cards present a truly flexible solution that can be used in applications spanning the LAN, MAN and WAN.

Key Features

  • Full line-rate throughput for 64 to 9,252 byte Ethernet frames on all ports with all features enabled
  • Pluggable XFP modules providing support for SR, LR, ER, ZR, DWDM and CX4 interfaces
  • CLI selectable option for WAN or LAN PHY on a per port basis, enabling flexible network design at the line card level
  • Guaranteed packet delivery through virtual output queues that minimize latency and eliminate head-of-line blocking
  • Wire-speed security features including up to 4K L2, 26K IPv4 and 8K IPv6 Access Control Lists (ACLs) per line card (using default CAM profiles)
  • Fully functional switching and routing with up to 64K MACs, 256K IPv4 addresses or 192K/6K IPv4/IPv6 addresses per series EF line card, or 512K IPv4 addresses and 32K IPv6 addresses per series EG line card (using default CAM profiles)
  • Configurable CAM profiles for IPv4/IPv6 FIBs, and ACLs that allow flexible CAM allocation based on network requirements
 

4-port 10 Gigabit Ethernet LAN/WAN PHY Line Card With Pluggable XFP Modules Specifications

 

Physical

  • Four full-duplex 10 Gigabit Ethernet LAN/WAN PHY ports with pluggable XFP modules
  • Occupies a single slot in the Force10 E600/E1200 chassis
  • Dimensions:
    • 1.07 h x 18.75 w x 16.06" d
      (2.7 h x 47.6 w x 40.79 cm d)
  • Weight:
    • 11 lbs (5 kg)
  • Maximum insertion force:
    • 32.5 lbs (14.7 kg)
  • Maximum power consumption and thermal output:
    • EF: 240 W (819 BTU/h)
    • EG: 260 W (887 BTU/h)
  • Operating temp:
    • 32° F to 104° F (0° C to 40° C)
  • Relative humidity:
    • 5 to 90% non-condensing
  • Maximum altitude:
    • 10,000 ft (3,048 m)

Management

  • Link status and link activity LEDs per port
  • Line card status LED
  • Onboard diagnostic capability

IEEE Compliance

  • 802.1p L2 Prioritization
  • 802.1Q VLAN Tagging, Double VLAN Tagging
  • 802.3ac Frame Extensions for VLAN Tagging
  • 802.3ae 10 Gigabit Ethernet
  • 802.3ak 10 Gigabit Ethernet
    (10GBASE-CX4)
  • 802.3x Flow Control
  • MTU 9,252 bytes
Regulatory Compliance

Safety

  • UL/CSA 60950-1, 1st Edition
  • EN 60950-1, 1st Edition
  • IEC 60950-1, 1st Edition Including all National Deviations and Group Differences
  • EN 60825-1 Safety of Laser Products Part 1:
    • Equipment Classification Requirements and User's Guide
  • EN 60825-2 Safety of Laser Products Part 2:
    • Safety of Optical Fibre Communication Systems
  • FDA Regulation 21 CFR 1040.10 and 1040.11

Emissions

  • Australia/New Zealand: AS/NZS CISPR 22: 2006, Class A
  • Canada: ICES-003, Issue-4, Class A
  • Europe: EN 55022: 2006 (CISPR 22: 2006), Class A
  • Japan: VCCI V3/2007.04 Class A
  • USA: FCC CFR 47 Part 15, Subpart B, Class A

Immunity

  • EN 300 386 V1.3.3: 2005 EMC for Network Equipment
  • EN 55024: 1998 + A1: 2001 + A2: 2003
  • EN 61000-3-2: Harmonic Current Emissions
  • EN 61000-3-3: Voltage Fluctuations and Flicker
  • EN 61000-4-2: ESD
  • EN 61000-4-3: Radiated Immunity
  • EN 61000-4-4: EFT
  • EN 61000-4-5: Surge
  • EN 61000-4-6: Low Frequency Conducted Immunity

RoHS

All E-Series components are EU RoHS compliant.

XFP Support

Any combination of Force10 SR, LR, ER, ZR, DWDM and CX4 XFPs may be populated. XFP modules are sold separately.

See Media Specifications for more details.

 

Ordering Information

 
  • Order Number
  • Description
  • LC-EF-10GE-4P
     
  • 4-port 10 GbE line card – XFP modules required
    (series EF)
  • LC-EG-10GE-4P
     
  • 4-port 10 GbE high capacity line card – XFP modules required (series EG)
  • GP-XFP-1S
  • Qualified SR/SW 10 GbE XFP optics module, LC connector
  • GP-XFP-1L
  • Qualified LR/LW 10 GbE XFP optics module, LC connector
  • GP-XFP-1E
  • Qualified ER/EW 10 GbE XFP optics module, LC connector
  • GP-XFP-1Z
  • Qualified ZR/ZW 10 GbE XFP optics module, LC connector
  • GP-XFP-Wxx
     
  • Qualified DWDM 10 GbE XFP optics module, LC connector (100 GHz ITU grid, C-Band)
  • GP-XFP-1CX4
  • Qualified CX4 10 GbE XFP module, CX4 connector
 

Force10 Networks line cards meet the requirements of demanding Layer 2 and Layer 3 applications. They support Layer 2 applications that require line rate performance and high port densities, and Layer 3 applications that demand robustness at low per-port prices.

 

 

 

 
 
back to top >
Downloads
Datasheet
Copyright 1999-2008 Force10 Networks, Inc. All Rights Reserved.
Last updated: 7/9/2008 12:07:15 PM