- Up to 32 10 GbE ports
in a single chassis
- Line-rate, non-blocking
performance

4-port 10 Gigabit Ethernet Line Card With Pluggable XFP Modules
The 4-port 10 GbE line card for the Force10 C-Series C150
and C300 with pluggable XFP modules, supports distances
of up to 80 km. This card provides a flexible solution for
applications spanning the LAN, MAN, and WAN.
This line card provides density of up to 32 line-rate,
non-blocking 10 Gigabit Ethernet ports in a single chassis.
Additionally, the C-Series ASICs and architecture enables
line-rate performance with QoS and Access Control Lists
(ACLs) enabled, jumbo frame support, and simultaneous
L2 switching and IPv4 routing. The intelligence embedded
in the line cards allows localized switching, providing
very low latency.
Key Features
- Full line-rate throughput for Ethernet frames from 64 byte to 9,252 byte
frames on all ports regardless of features enabled
- Pluggable XFP modules providing support for SR, LR, ER, ZR, DWDM
and CX4 interfacee
- 5 microsecond switching latency under full load for 64 byte frames
- Per-port status and activity LEDs
4-port 10 Gigabit Ethernet Line Card With Pluggable XFP Modules
Physical
- Four full-duplex 10 Gigabit Ethernet
ports with pluggable XFP modules
- Occupies a single slot in the Force10
C150/C300 chassis
- Dimensions:
- 1.75 h x 15.25 w x 13.75" d
(4.45 h x 38.74 w x 34.93 cm d)
- Weight:
- Maximum power consumption and thermal output:
Maximum Operating Specifications
- Temperature:
- 32° to 104°F (0° to 40°C)
- Altitude:
- No performance degradation to
10,000 ft (3,048 m)
- Relative humidity:
- 5 to 85 percent, non-condensing
Maximum Non-Operating
Specifications
- Temperature:
- -40° to 158°F (-40° to 70°C)
- Maximum altitude:
- Relative humidity:
- 5 to 95 percent, non-condensing
Management
- Link status and link activity LED per port
- Status LED per line card
- Onboard diagnostic capability
IEEE Compliance
- 802.1p L2 Prioritization
- 802.1Q VLAN Tagging, Double VLAN Tagging
- 802.3ac Frame Extensions for VLAN Tagging
- 802.3ae 10 Gigabit Ethernet
- 802.3ak 10 Gigabit Ethernet
(10GBASE-CX4)
- MTU 9,252 bytes
Regulatory Compliance
Safety
- UL/CSA 60950-1, 1st Edition
- EN 60950-1, 1st Edition
- IEC 60950-1, 1st Edition Including all
National Deviations and Group Differences
- EN 60825-1 Safety of Laser Products Part 1:
- Equipment Classification Requirements
and User's Guide
- EN 60825-2 Safety of Laser Products Part 2:
- Safety of Optical Fibre Communication
Systems
- FDA Regulation 21 CFR 1040.10 and 1040.11
Emissions
- Australia/New Zealand: AS/NZS CISPR 22:
2006, Class A
- Canada: ICES-003, Issue-4, Class A
- Europe: EN 55022: 2006 (CISPR 22: 2006),
Class A
- Japan: VCCI V3/2007.04 Class A
- USA: FCC CFR 47 Part 15, Subpart B, Class A
Immunity
- EN 300 386 V1.3.3: 2005 EMC for Network Equipment
- EN 55024: 1998 + A1: 2001 + A2: 2003
- EN 61000-3-2: Harmonic Current Emissions
- EN 61000-3-3: Voltage Fluctuations and Flicker
- EN 61000-4-2: ESD
- EN 61000-4-3: Radiated Immunity
- EN 61000-4-4: EFT
- EN 61000-4-5: Surge
- EN 61000-4-6: Low Frequency Conducted Immunity
RoHS Compliance
All C-Series components are EU RoHS compliant.
XFP Support
Any combination of Force10 SR, LR, ER, ZR, DWDM and CX4 XFPs may be populated. XFP modules are sold separately.
Ordering Information
- LC-CB-10G-4P
- 4-port 10 GbE line card – XFP modules required
(series CB)
- GP-XFP-1S
- Qualified SR/SW 10 GbE XFP optics module, LC connector
- GP-XFP-1L
- Qualified LR/LW 10 GbE XFP optics module, LC connector
- GP-XFP-1E
- Qualified ER/EW 10 GbE XFP optics module, LC connector
- GP-XFP-1Z
- Qualified ZR/ZW 10 GbE XFP optics module, LC connector
- GP-XFP-Wxx
- Qualified DWDM 10 GbE XFP optics module, LC connector
(100 GHz ITU grid, C-Band)
- GP-XFP-1CX4
- Qualified CX4 10 GbE XFP module, CX4 connector
back to top >
Last updated: 7/10/2008 11:44:35 AM